All undergraduates at Florida State University must demonstrate basic computer skills competency prior to graduation. As necessary computer competency skills vary from discipline to discipline, each major determines the courses needed to satisfy this requirement. Undergraduate majors in studio art satisfy this requirement by earning a grade of "C–" or higher in CGS 2060, CGS 2064, ART 1602C, or ART 4926C. Undergraduate majors in graphic design satisfy this requirement by earning a grade of "C–" or higher in ART 1602C or ART 4926C.

The State of Florida has identified common program prerequisites for this University degree program. Specific prerequisites are required for admission into the upper-division program and must be completed by the student at either a community college or a state university prior to being admitted to this program. Students may be admitted into the University without completing the prerequisites, but may not be admitted into the program.

At the time this document was published, some common program prerequisites were undergoing revision. Please visit http://facts23.facts.org/navigation/detail_ext/cpp_intro.do?pageId=060304 for a current list of state-approved prerequisites.

The following lists the common program prerequisites or their substitutions necessary for admission into this upper-division degree program:

Studio/Fine Art

1. ART X201
2. ART X202 or ART X203
3. ART X300
4. ART X301
5. ARH X050
6. ARH X051
7. ART XXXX or PGY XXXX: six to nine (6–9) credit hours of introductory media courses with a maximum of two (2) photography courses allowed

Graphic Design

1. ART X300
2. ART X201
3. PGY X401
4. ARH X050 or ARH X051

Note: Although optional, students are encouraged to include two to four (2–4) of the following six courses: ARH X050, ARH X051, ART X203, ART X301, GRA XXXX (Computer Graphics), or GRA XXXX (Graphic Design).

Admission and Readmission

Since the requirements for admission to the major in studio art and design are currently being reviewed, students entering the department should inquire for specific details regarding major requirements, or visit the department's Web site at http://www.fsu.edu/~art/pages/programs/undergraduate/.

Students who apply for readmission to the department must meet the art or design degree requirements listed in the General Bulletin that is current at the time of readmission.

Academic Performance and Retention

The Department of Art reserves the right to discontinue enrollment of art major students at any time if satisfactory academic progress is not being made. Students who have accumulated three unsatisfactory grades (U, F, D–, D, D+) in art courses taken for college credit at Florida State University or elsewhere will not be permitted to continue, be readmitted, or graduate with a major in studio art or design. Courses in which a grade below the minimum is received may only be repeated once. Repeated courses designated as non-repeatable (such as foundations courses) will not be counted toward overall credit hours per University requirements. Students must maintain a minimum cumulative GPA of 2.5. If a student receives a "D" or "F" in a major requirement, or if the GPA falls below the minimum, s/he is placed on probation for the following semester. If the student's grade or GPA falls below the minimum standards by the end of the probationary semester, s/he is dismissed from the Department of Art. The Department of Art retains the right to refuse admission or terminate enrollment at any time if a student fails to maintain the standards of the program.

The Foundations Program

The Department of Art requires that students receive a sound foundation in basic visualization and conceptualization skills and in the fundamentals of studio theory and practice. To this end, students must complete a foundations program before taking other art courses. The program consists of a sequence of basic drawing, design, art theory, and imaging courses. Students are encouraged to complete their foundations-level courses, particularly in drawing and design, by the end of the sophomore year. The requirements for foundations are currently being reviewed. Entering students should contact the department for specific details regarding foundations requirements.

Mission

The Art Foundations Program provides beginning art students with the fundamental skills, knowledge, and experiences essential to their further development as visual arts professionals.

Philosophy

In the Foundations Program, students are encouraged to expand their technical skills, develop their critical judgment, explore interdisciplinary connections, refine their personal goals, and increase their understanding of contemporary art and design. Inventive concepts are used to fuel development of compelling composition and constructions. The curriculum provides the basis on which the BA and BFA programs are built in the art department and also provides fundamental coursework for the BS in art education.

Note: Students are required to complete State of Florida Common Program Prerequisites as listed above.

Required Foundations Courses

(Foundation for all art majors)

The following list of classes must be taken as prerequisites for all other art courses to complete the required foundations program. The requirements for foundations are currently being reviewed. Entering students should contact the department for specific details regarding foundations requirements.

ART 1000 Success Strategies (1)

ART 1201C Two-Dimensional Foundations (3)

ART 1203C Three-Dimensional Foundations (3)

ART 1300C Drawing Foundations (3)

ART 1602C Digital Imaging Foundations (3)

ART 2003C Survey of Studio Art Practices (3)

ART 2330C Figure Drawing Foundations (3)

Note: Prior to applying to the BFA program in graphic design, all students must take GRA 2190 Graphic Design I, and DIG 3025 Design History and Theory.

The Bachelor of Arts Degree in Studio Art

The Bachelor of Arts (BA) degree in studio art is a fundamental liberal arts program totaling one hundred-six semester hours. Requirements are as follows: liberal studies, thirty-six semester hours; completion of the foundations program, nineteen semester hours; art history, nine semester hours; additional studio, twenty-one semester hours; the successful completion of a foreign language course through the intermediate level; and semester hours of additional humanities over and above the basic liberal-studies requirement.

Bachelor of Fine Arts Admission Application

Upon completion of the nineteen semester hours in the foundations program, (Design requires an additional six semester hours of Design) application for the Bachelor of Fine Arts (BFA) degree is by portfolio review by the faculty. Admission to the program is highly selective. Students are required to have an acceptable GPA in all major requirements. The admission process includes an individual review of the student's portfolio by faculty members who may recommend that the work be submitted to the entire faculty for consideration. Students may attempt admission to the BFA program a maximum of two times in the department, in any combination of Studio Art and/or Design.

The Bachelor of Fine Arts Degree in Studio Art

The Bachelor of Fine Arts (BFA) in studio art is a limited access, one hundred-eighteen semester-hour program. It differs from the BA degree in that it provides the graduate with a more intensive background in professional skills and theoretical knowledge. The BFA degree seeks to develop in graduates an informed personal vision, a high level of competence in technique, and the ability to make sound artistic decisions. It is a proficiency-based program characterized by continuous assessment. Upon completion of the nineteen semester hours in the foundations program, application for the BFA degree is by faculty portfolio. The process includes an individual review of the student's portfolio by faculty members who may recommend that the work be submitted to the entire faculty for consideration.

In addition to the thirty-six semester hours of liberal studies, coursework includes nineteen semester hours of foundations, fifty-one semester hours of studio art courses, and twelve semester hours of art history. An important aspect of the program is that students are taught to make their own decisions with regard to media selection or concentration. Students admitted to the BFA program are exempt from the language requirement. They are required to maintain a 3.0 grade point average (GPA) in art and art history courses. They are required to fulfill the additional requirements and responsibilities of this program including attending and satisfactorily performing in all BFA reviews, culminating in the advancement review and graduation show. The BFA adviser can provide additional guidance regarding entrance and specific degree requirements.

The Bachelor of Fine Arts Degree in Design

The Bachelor of Fine Arts (BFA) in design is a limited access, one hundred-eighteen semester-hour program. It differs from the Bachelor of Arts (BA) degree in that it provides the graduate with a more intensive background in professional skills and theoretical knowledge. Upon completion of the nineteen semester hours in the foundations program, three semester hours of GRA 2190C and three semester hours of DIG 3025, application for the BFA degree is by faculty portfolio review. The process includes an individual review of the student's portfolio by faculty members, who may recommend that the work be submitted to the entire faculty for consideration.

In addition to the thirty-six semester hours of liberal studies, coursework includes nineteen semester hours of foundation; fifty-one semester hours in graphic design/electronic arts and related studio art subjects; and twelve semester hours in art history. Students admitted to the BFA program are exempt from the language requirement, and they are required to maintain a 3.0 grade point average (GPA) in art and art history courses. They are required to fulfill the additional requirements and responsibilities of this program including attending and satisfactorily performing in all BFA reviews, culminating in the advancement review and graduation show. The BFA adviser can provide additional guidance regarding entrance and specific degree requirements.

The Master of Fine Arts Degree

The master of fine arts (MFA) in studio art is a residency program with a minimum requirement of sixty semester hours at the graduate level. In addition to University admission requirements, the department requires that all applicants submit a portfolio of slides or original work for review. The program includes a minimum of thirty-two semester hours in studio art, eleven semester hours of electives within or outside the department, a minimum of three courses (nine semester hours) in art history at the graduate level, and a minimum of eight semester hours toward preparation of the graduate exhibition and thesis.

For information regarding the MFA degree, please contact the Department of Art academic adviser and refer to the Graduate Bulletin.

Students in each course will be instructed in safe practice with both tools and materials and will be responsible for following safety regulations.

ARE—Art Education

ARH—Art History

ART—Art

DIG—Digital Media

GRA—Graphic Arts

PGY—Photography

Correlating Courses

ARH 2630C. Survey in African-American Art (3). This course surveys special topics in African-American art and aesthetics. We will explore power dynamics, social protest, artistic accommodation, criticism, perception, content, and motivation as historical and contemporary influences on and in African-American art.

ART 3949r. Cooperative Education Work Experience (0). (S/U grade only.) Internships in a variety of work situations are available. These internships are selected by the faculty to broaden the students' skills and flexibility as artists.

PGY 2100C. Photography for Non-Art Majors (3). An introduction to camera operation and image making, with discussion of contemporary and historical work. Emphasis on 35mm slide projects rather than printing techniques. (This course may be offered as part of FSU International Programs curriculum.)

Studio Courses

ART 1000. Success Strategies in Art and Design (1). (S/U grade only.) This course provides and orientation designed to increase first-year student success, introduce departmental concentrations, and explore career possibilities.

ART 1201C. Two-Dimensional Foundations (3). Experience in conceptualizing, creating, and critiquing two-dimensional compositions using the elements and principles of design.

ART 1203. Three-Dimensional Foundations (3). This course provides experience in designing and constructing expressive three-dimensional forms using a variety of materials and methods.

ART 1300C. Drawing Foundations (3). Creative expression and communication using a variety of black and white media.

ART 1602C. Digital Foundations (3). This course offers an introduction to the theory and practice of digital imaging and the basics of time-based art and design.

ART 2003C. Survey of Studio Art Practices (3). Demonstration, discussions, and slide/film presentations explore the way artists work in a broad range of media. Emphasis on visual perception and basic art making.

ART 2130C. Beginning Fiber/Fabric Design (3). Prerequisites: ART 1201C and ART 1300C. This is an introductory survey of fabric design. Traditional and contemporary applications of fabric are discussed. Nonwoven techniques, resist dyeing, and basic weaving are explored.

ART 2205. Color Theory Foundations (3).This course offers experiments in color perception and in the uses of color in visual communication and expression.

ART 2301C. Drawing II (3). Prerequisites: ART 1300C and ART 1201C. This course builds on the technical and conceptual skills learned in Drawing I. Artistic expression and communication through drawing in both black and white and color media.

ART 2330C. Figure Drawing Foundations (3). Exploration of the anatomical and conceptual complexities of the human form.

ART 2400C. Fundamentals of Printmaking: Relief (3). Prerequisites: ART 1201C and ART 1300C. An introduction to relief printing in wood block, linoleum block, and collographcolgraph.

ART 2430C. Fundamentals of Printmaking: Silkscreen (3). Prerequisites: ART 1201C and ART 1300C. An introduction to the basic techniques of serigraphy using non-toxic processes.

ART 2441C. Fundamentals of Printmaking: Etching (3). Prerequisites: ART 1201C and ART 1300C. An introduction to intaglio printing with line etch, aquatint, and softground using non-toxic processes.

ART 2500C. Painting I (3). Prerequisites: ART 1201C and ART 1300C. An introduction to personal expression in painting medium; emphasizes color, composition, and painting techniques through historical examples and technical demonstrations.

ART 2501C. Painting II (3). Prerequisite: ART 2500C. Development of skills/methods of collecting and considering images, along with in-depth study of painting techniques. Discussion of related contemporary and historical examples.

ART 2600. Introduction to Digital Imaging (3). Prerequisites: ART 1201C and ART 1300C. Corequisite: GRA 2190C. Beginning training in digital arts and graphic design.

ART 2701C. Sculpture I (3). Prerequisites: ART 1201C and ART 1300C. Introduction to basic sculptural processes of fabrication, carving, modeling, and casting. Emphasis on developing ideas through analytical responses to assignments.

ART 2752Cr. Wheel Throwing (3). This is a first course in which the student learns to throw on the potter's wheel. From the basic cylinder, the student learns to form a pitcher, covered jar, and other functional shapes. Some alteration of thrown forms is also covered. Experience with clay and glazing is helpful but not required. This course may be repeated to a maximum of nine (9) semester hours, with requirements increasing in difficulty each time.

ART 2893r. Contemporary Art Seminar (1). (S/U grade only.) This is a lecture and discussion course conducted by studio faculty. It provides students with insight into the current work by resident faculty and visiting artists. May be repeated to a maximum of three (3) semester hours.

ART 3333C. Figure Drawing II (3). Prerequisites: ART 1300C and ART 2330. This course explores the anatomical, conceptual, and expressive complexities of the human form.

ART 3380. Experimental Drawing (3). Prerequisites: ART 1300C and ART 2330C. This course explores a variety of approaches to drawing using a wide range of media, materials, and strategies.

ART 3420C. Fundamentals of Printmaking: Lithography (3). Prerequisites: ART 1201C, ART 1203, and ART 1300C. An introduction to the basic lithographic techniques of graining, drawing, etching, and printing.

ART 3542C. Watercolor (3). Prerequisites: ART 1201C, ART 1203, and ART 1300C. An introduction to transparent watercolor techniques through lectures and visual aids which demonstrate its possibilities.

ART 3710C. Sculpture II (3). Prerequisite: ART 2701C. Allows continued experience in more complex three-dimensional techniques; emphasis on individual projects and conceptual approach.

ART 3764C. Beginning Ceramics (3). Prerequisites: ART 1201C, ART 1203, and ART 1300C. Handbuilding processes and fundamental glazing techniques. Emphasis is on the development of a high degree of technical proficiency and a keen sense of form in ceramic mediums.

ART 3930r. Special Topics in Art (1–3). (S/U grade only.) Faculty develops topics of importance to students' interests and needs. May be repeated to a maximum of three (3) semester hours.

ART 4312C. Drawing III (3). Prerequisite: ART 3333C. This course focuses on creative expression and communication through a variety of drawing tools, media, and processes.

ART 4334C. Figure Drawing II (3). Prerequisite: ART 3333C. This course offers extensive development of figurative imagery, concepts, and presentation strategies in support of personal aesthetic development.

ART 4382C. Advanced Experimental Drawing (3). Prerequisite: ART 3380C. This course offers an advanced exploration of drawing as research, concept, communication, and collaboration.

ART 4800. Criticism Seminar (3). Aspects of contemporary art scene, galleries, and markets. Stress on developing portfolio/resume, critical attitude, and skills necessary for presenting work.

ART 4905r. Directed Individual Study (3–9). May be repeated to a maximum of nine (9) semester hours.

ART 4943r. Internship in Creative Art (1–12). (S/U grade only.) Prerequisites: Core program and "B" average in all related courses. Preference given to seniors. Internships in a variety of work situations. Must be approved by department chair. May be repeated to a maximum of twelve (12) semester hours.

ART 4981r. Honors Work (3). May be repeated to a maximum of twelve (12) semester hours.

DIG 3025. Design History and Theory (3). Prerequisites: ART 1201C, ART 1203, ART 1300C, ART 2003C, ART 2301C, and ART 2330C. This course examines the historical development of design styles and techniques and their influences on contemporary culture.

GRA 2190C. Graphic Design I/Introduction (3). Prerequisites: ART 1201C, ART 1300C, and ART 1602C. Corequisite: DIG 3025. This course is a continuation of the basic concepts introduced in foundations. Exploratory design problems include iconography, signs and symbols, and two-dimensional and three-dimensional compositions. These problems extend the methodology and conceptualizing/problem-solving skills of design.

GRA 3112C. Graphic Design II/Typography (3). Prerequisites: GRA 2190C and DIG 3025. This course introduces students to typography and how type works as pure design creating form, value, direction, etc., as letter forms or marks, as well as on a communication level as a message carrier.

GRA 3193C. Graphic Design III/Production (3). Prerequisite: GRA 2190C.This course explores the design process by solving specific design problems in video and sound, going from conceptualization to refinement and final implementation.

GRA 4108. Contemporary Design Seminar (3). Prerequisite: Admission to BFA program. This course is intended to develop knowledge of the historical and social forces that have shaped and continue to shape art and design in contemporary culture.

PGY 2401C. Photography I (3). Prerequisite: ART 1201C, ART 1203, ART 1300C, ART 1602C, and PGY 2941C This course offers a study of photography as a creative means of expression. Topics include 35mm technology and fine black-and-white printmaking.

PGY 2941C. Digital and Photographic Imaging (3). Prerequisite: ART 2501 This course introduces students to lens-formed image production through both liquid (traditional darkroom) and dry processes (digital). It includes image analysis within both critical and historical frameworks.

PGY 3410C. Photography II (3). Prerequisite: PGY 2401C. Photography as a fine art. Students develop a series of portfolios of images based on their personal vision and understanding of the medium.

Media Workshops

Note: The media workshops allow students to pursue intensive technical studies in one specific medium under the appropriate instructor. Workshops serve as an extension of intermediate courses in corresponding media.

ART 4921Cr. Media Workshop: Painting (3). Prerequisite: ART 2501C.2510C. Independent studies under painting instructors; emphasis on competence in medium and development of individual solutions to problems. May be repeated to a maximum of twelve (12) semester hours.

ART 4922Cr. Media Workshop: Sculpture (3). Prerequisites: ART 2701C and, for the clay sculpture workshop only, ART 3110C. Intensive studies under sculpture instructors; stresses competence in the following areas: casting in nonferrous metals, steel fabrication techniques, woodworking and landscape sculpture planning and production, and clay sculpture workshop. May be repeated to a maximum of twelve (12) semester hours.

ART 4923Cr. Media Workshop: Printmaking (3). Prerequisites: Appropriate courses in fundamentals of printmaking series and, for the photo-silkscreen and photo-lithography workshops only, PGY 2401C. Advanced techniques of silkscreen, relief printing, etching, and lithography, as well as photo-silkscreen, relief printing, and papermaking, depending on appropriate instructor. May be repeated to a maximum of twelve (12) semester hours.

ART 4924Cr. Media Workshop: Photography (3). Prerequisites: PGY 2401C and PGY 3410C. Various areas of photographic study, including nonsilver and advanced silver printing techniques, offset lithography, and conceptual approaches to image making. May be repeated to a maximum of twelve (12) semester hours.

ART 4925Cr. Media Workshop: Word and Image (3). Prerequisites: ART 2230C, ART 3232C, and ART 3233C. Intensive studies in intermediate graphic design. May be repeated to a maximum of twelve (12) semester hours.

ART 4925Cr. Media Workshop: Typography (3). Prerequisites: ART 2230C, ART 3232C, and ART 3233C. Intensive studies in intermediate graphic design issues dealing with typography. May be repeated to a maximum of twelve (12) semester hours.

ART 4925Cr. Media Workshop: Design Production and Image (3). Prerequisites: ART 2230C, ART 3232C, and ART 3233C. Intensive studies in intermediate graphic design dealing with issues in image and production techniques. May be repeated to a maximum of twelve (12) semester hours.

ART 4926Cr. Media Workshop: Electronic Imaging (3). Corequisite: GRA 2190C. Electronic imaging, video, computer graphics, animation. May be repeated to a maximum of twelve (12) semester hours.

ART 4927Cr. Media Workshop: Metals (3). Prerequisite: ART 2701C. Includes sculptural methods and metal forming in a more expansive and versatile approach. May be repeated to a maximum of twelve (12) semester hours.

Advanced Workshops

Note: The advanced workshops continue the intensive level of study of the media workshops while providing students with more flexibility. Under this workshop system, a student may work with any instructor, regardless of media affiliation, in any area of study. Instructors are designated by section number. Each course may be repeated to a maximum of twenty-seven (27) semester hours. Prerequisites for all advanced workshops include the following foundation courses: ART 1000, ART 1201C, ART 1203, ART 1300C, ART 1602C, ART 2003C, ART 2330C. Students should have completed one or more area-specific intermediate level class prior to taking advanced workshops in that area.

ART 4928Cr. Advanced Workshop (3). This is a tutorial course available only to BFA and BABS students. May be repeated to a maximum of twenty-seven (27) semester hours.

ART 4928Cr. Advanced Workshop: Animation (3).

ART 4928Cr. Advanced Workshop: BFA All Media (3).

ART 4928Cr. Advanced Workshop: Ceramics (3).

ART 4928Cr. Advanced Workshop: Painting (3).

ART 4928Cr. Advanced Workshop: Photography (3).

ART 4928Cr. Advanced Workshop: Printmaking (3).

ART 4928Cr. Advanced Workshop: Print Design (3).

ART 4928Cr. Advanced Workshop: Sculpture (3).

ART 4828Cr. Advanced Workshop: Web Design (3).

ART 4929Cr. Advanced Workshop (3). This is a tutorial course available only to BFA and BABS students. May be repeated to a maximum of twenty-seven (27) semester hours.

ART 4929Cr. Advanced Workshop: 3-D Animation (3).

ART 4929Cr. Advanced Workshop: Animation (3).

ART 4929Cr. Advanced Workshop: Ceramics (3).

ART 4929Cr. Advanced Workshop: Digital Cinema (3).

ART 4929Cr. Advanced Workshop: Painting (3).

ART 4929Cr. Advanced Workshop: Photography (3).

ART 4929Cr. Advanced Workshop: Printmaking (3).

ART 4929Cr. Advanced Workshop: Print Design (3).

ART 4929Cr. Advanced Workshop: Sculpture (3).

ART 4929Cr. Advanced Workshop: Web Design (3).

ART 4930Cr. Advanced Workshop (3). Critical issues in contemporary art. The course will vary each semester and will cover topics of critical significance in 20th-century contemporary art. This is a seminar course open only to BFA students. May be repeated for a maximum of twenty-seven (27) semester hours.

ART 4931r. Instruction in Advanced Technical Problems (3–6). May be repeated to a maximum of six (6) semester hours.

Art Related Courses

Note: Some University courses are designated art related and may be accepted toward the BFA degree with written approval from the director of the BFA program and the chair of the department. Students who wish to take art related courses that significantly contribute to their media focus should contact the department regarding requirements. Requirements are currently being reviewed.

ARE 5387. Teaching College Art (3).

ART 5898. Art, Technology, and Critical Theory (3).

ART 5934r. Contemporary Art Seminar (1). (S/U grade only.)

ART 5410. Graduate Printmaking (3).

ART 5790. Graduate Ceramics (3).

ART 5898. Art, Technology, and Critical Theory (3).

ART 5927Cr. Graduate Workshop (1–4).

ART 5928Cr. Graduate Workshop (1–6).

ART 5929Cr. Graduate Workshop (4).

ART 5937r. Graduate Instruction in Advanced Technical Problems (4–8).

ART 5940r. Supervised Teaching (1–3). (S/U grade only.)

ART 5955. Digital Portfolio (3).

ART 5972r. Graduate Show and Thesis (1–8). (S/U grade only).

PGY 5930. Graduate Photography (3).